**GoPro Camera Not Included**

The Phantom is DJI’s first small size Ready-to-Fly VTOL. It not only has an attractive appearance, but also has a built-in Naza-M + GPS multi-rotor autopilot system giving a stable and reliable flight characteristic. It also comes with its own dedicated R/C controller. Flight parameters and functions have been setup and tuned by DJI engineers before delivery, so you can fly your Phantom the moment you receive it. It is so easy to operate and stable, this makes aerial filming a breeze.

Features of Phantom

• Attractive and highly integrated design 
• Stable, yet agile performance, easy to fly 
• Two flight control modes, including position hold 
• GPS & Compass module included 
• Contains remote control unit, ready to fly 
• Intelligent Orientation Control (IOC) mode 
• Low voltage protection 
• High intensity LED Indicators, to aid orientation during flight 
• Camera mount included for GoPro (GoPro not included) 
• Lipo flight battery and charger included

Recommended Battery:

• Hyperion HP25C25003SX

Basic Parameters

• Operating Temperature -10°C ~ 50°C
• Power Consumption 3.12W
• Take-off Weight <1000g
• Hovering Accuracy (GPS Mode)Vertical: ± 0.8m. Horizontal: ± 2.5m
• Max Yaw Angular Velocity 200°/s
• Max Tilt Angle 45°
• Max Ascent / Descent Speed ±6m/s
• Max Flight Velocity 10m/s
• Diagonal distance (motor center to motor center) 350mm

ESC Sound Introduction

• Ready ♪1234567
• Throttle stick is not at bottom BBBBBB…
• Input signal abnormal B——–B——–B…
• Input voltage abnormal BB—BB—BB—BB…

Charger & Battery Parameters

• Charger AC Input 100-240V
• Charge Current 1A/2A/3A
• Current Drain for Balancing 200mA
• Power 20W
• Battery Type LiPo

TX Parameters

• Working Frequency 2.4GHz ISM
• Control Channels 6 Channels
• Communication Distance 300m
• Receiver Sensitivity（1%PER） ＞-93dBm
• Power Consumption of TX ＜20dBm
• Working Current /Voltage 52 mA@6V
• AA Battery 4 Required