New Kenda K671 tire with stylish new pattern. 10" diameter tire fits 4" diameter rim.

This sprocket fits the Evo 2, and 2X. It will not work on a Evo SPX since they are a chain drive.

Expect as much as a 10MPH top speed increase, but with a loss of climbing power unless you combine it with the power pipe (recommended). If you are using your scooter around hills without the pipe, this might not be the best choice for you.

I have the combination of the pipe with the 21T on my own 2X and find it to be an awesome combination of acceleration and top end speed.

A pair of rings to fit the Evo 2X or Evo SPX 50cc engine. Evo Part number 20024

This scrub board fits the Evo 2, 2X, and SPX. If you don't have the scrub board bolts (longer, special bolts) you need to add them on as an option below.

This is an ignition coil for an Evo R engine. It will not work with an Evo 2 or Evo 2X.

This includes the grommet, the three hoses, one way vent and tank filter all in one kit. Fits Evo 2, 2X and SPX 20042

This is a complete carb kit for the Evo Active 40 cc and 50cc engines. It includes the diaphragm and the priming bulb in addition to the gaskets and o-rings you would need to rebuild it.

Shift lever for Evo 2 or 2X Gas scooters