E-Glide GI Powerboard Electric Skateboard - Gas Scooters, Electric Scooters, and Scooter Part Sales

We have been working for over a year on a new design of powerboard that would incorporate pneumatic tires along with low deck height, and would out carve any electric skateboard ever built.

The problem with all the of the big pneumatic tire equipped powerboards is the design which incorporates a high deck, excessively wide trucks, and large tires which are acceptable off-road, but diminish the traditional skateboard "feel" of the powerboard.

The higher the deck, the higher the center of gravity.

As the center of gravity is raised, handling, carving ability, and rider feel is diminished. Compare it to a low profile sports car going around a race track, compared to a jacked up SUV. It's similar with a powerboard, a high deck feels like your standing on a ladder compared to a low deck, which allows you to carve hard and feel confident.

The wider the trucks, the less responsive the board is to carving. It becomes more like a power platform, and looses it's closeness in feel to the skateboard.

We built all kinds of prototypes, using different decks, truck designs, tire/wheel combinations, motor mounting systems, chain drives, etc. We motorized the Carveboard, MBS mountainboards, tried different motor plate systems, battery mounting configurations, and just about anything you can imagine. We finally came up with a design that handles unbelievably, uses pneumatics (you can actually inflate these tires to 60PSI), and has a low deck design.

The guys at Ground Industries, who make the most innovative dirt boards and kite boards in the world, had developed a truck called the Bionic Truck, which was the key to allowing us to produce this low deck/pneumatic tired board which had kept eluding us. Check out their products at www.groundindustries.com.

The top of the line trucks retail for $160 a pair, the center pivot torsion truck design allows for different stiffness densities (six stages from soft to hard), you can dial in the trucks for your weight and requirements.

The end result, and pictured here, is the E-Glide GI. This is the best "carving" electric skateboard ever built. It features:

• An aluminum battery box with skid plate (batteries mount fore and aft, rather than side by side)

• Ground Industries Bionic Trucks

• Ground Industries Deck

• High Pressure Pneumatic Tires

• MBS Rockstar Aluminum Mag Style Wheels

• 1000 watt/1500 watt peak power, 36 volt motor.

Beyond that it comes with our "industrial grade European electronics which are warranted for one full year.

Everything about this powerboard is custom, and expensive, and it will be offered on a VERY LIMITED basis. It is truly a Rolls Royce of powerboards.

Official GI Powerboard video:

GI powerboard with Kenda street slick tires video

I Will Wear My Helmet and Pads:
"Signature Required" Shipping Option:
$35.95 Helmet Special: